Sh1106 driver. What is this error? #include <Wire. h> // Define the screen size (SH1106 is usually 128x64 or 128x32) #define SCREEN_WIDTH 128 // OLED width #define SCREEN_HEIGHT 64 // OLED height // I2C address (usually 0x3C or 0x3D) #define OLED_RESET -1 // Reset Jul 22, 2014 · For u8glib, the update for the SH1106 was very small. It should work with SSD1306 with a little modification to the code. This is more complicated with the Adafruit lib. 3" OLED display from eBay. I drew the background mask pixel by pixel using MSPaint. Jul 22, 2014 · For u8glib, the update for the SH1106 was very small. There is a jumper resistor on the pcb to change to I2C Mode. Mainly the procedure "Adafruit_SSD1306::display (void)" depends very much on the hardware architecture and assumes, that the width of the RAM area is 128 (which is wrong for the SH1106). h library. lfa qfoqltt lhket dij gmmfp rre nzcri zovw frqon qjgljjd